Every single method, every single part, each and every purpose in EPG is demanded to be accomplished a single phase adhering to another, meticulously and cautiously, from content assortment, reformation to production equipment, from elements warmth remedy to automated assembly, from top quality handle to product inspection and tests and from purchase working to after revenue service. Our organization pays particular interest to customers’ requirements, listening to the particular demands of each consumer and guaranteeing total satisfaction. we provide chromed bar and tubes for hydualic and pheumatic cylinders. Introduction:
1. HS series slurry pump is made for the ongoing pumping of higher abrasive, EPT slurries with minimal maintenance requirements. The sporting parts are created of ultra chrome or and rubber. It will maintain higher efficiency above the dress in existence of its elements.
two. The steel moist elements and rubber ones can be interchangeable for dealing with distinct liquids or slurries.
3. HS slurry pumps are accessible in dimensions ranging from one inch to 18 inch discharge and attribute large effectiveness functionality capable of stream charges from 10.8 to 5400 m sup3/h and heads up to one hundred twenty five meters for large head types.
Features:
1. Cylindrical construction of bearing assembly: handy to modify the space amongst impeller and JCEP liner
and can beremoved fully
2. Interchangeable anti-abrasive damp components created of large-chrome alloys
3. Casing halves of ductile iron with exterior reinforcing ribs give high operating stress capabilities
and an further measure of basic safety.
4. The discharge department can be oriEPTTd to any eigEPTT positions at the interval of 45 levels
five. Numerous EPT types: DC(immediate link), V-belt EPT, EPT box EPTT, EPT couplings, VFD,
SCR handle, etc
six. The shaft seal utilizes the EPTT seal, expeller seal and mechanical seal
Standard Application:
#8226 Mineral processing | #8226 EPT | #8226 EPTT Washery | #8226 Cyclone feeds |
#8226 Bentonite | #8226 EPTT slurry | #8226 EPTEPTTng | #8226 Mill grinding |
#8226 Ash hXiHu (West EPT) Dis.Hu (West EPT) Dis. | #8226 Tunnel | #8226 Waste sludge | #8226 Coarse sand |
#8226 Lime mud | #8226 Phosphoric acid | #8226 EPTT | #8226 EPTT |
#8226 Alumina JCEP | #8226 EPTT Plant | #8226 Potash FerEPTTzer Plant | #8226 Other EPTT |
#8226 Iron ore sand | #8226 JCEP Concentration | #8226 EPT EPT | #8226Molybdenum |
Product | Max EPTT (Kw) |
Inlet amp Outlet dimension (inch) | EPT for Use Areas | Flow Charge (Q) | EPT (H) meter |
Speed (RPM) |
EPTTeller Dia. (mm) |
|
m sup3/hr | l/s | |||||||
25HS-B | fifteen | 1.5/one | M | twelve.6~28.8 | 3.five~8 | six~sixty eight | 1200~3800 | 152 |
R | ten.eight~25.two | 3~seven | seven~fifty two | 1400~3400 | 152 | |||
40HS-B | fifteen | 2/one.five | M | 32.four~seventy two | 9~20 | 6~fifty eight | 1200~3200 | 184 |
R | twenty five.2~fifty four | 7~fifteen | five.five~forty one | 1000~2600 | 178 | |||
50HS-C | thirty | 3/2 | M | 39.six~86.four | 11~24 | twelve~sixty four | 1300~2700 | 214 |
R | 36~75.6 | ten~21 | thirteen~forty six | 1300~2300 | 213 | |||
75HS-C | thirty | four/3 | M | 86.4~198 | 24~fifty five | 9~52 | one thousand~2200 | 245 |
R | seventy nine.2~a hundred and eighty | 22~fifty | 5~34.5 | 800~1800 | 245 | |||
100HS-D | 60 | six/4 | M | 162~360 | forty~100 | twelve~fifty six | 800~1550 | 365 |
R | one hundred forty four~324 | forty~ninety | twelve~45 | 800~1350 | 365 | |||
150HS-E | 120 | 8/6 | M | 360~828 | a hundred~230 | ten~sixty one | five hundred~1140 | 510 |
R | 324~720 | ninety~200 | 7~49 | 400~1000 | 510 | |||
200MS-E | a hundred and twenty | ten/8 | M | 666~1440 | 185~four hundred | 14~60 | 600~1100 | 549 |
200HS-ST | 560 | ten/8 | M | 612~1368 | one hundred seventy~380 | 11~61 | 400~850 | 686 |
R | 540~1188 | one hundred fifty~330 | 12~50 | four hundred~750 | 686 | |||
250HS-ST | 560 | 12/ten | M | 936~1980 | 260~550 | seven~68 | 300~800 | 762 |
R | 720~1620 | two hundred~450 | 7~45 | 300~650 | 762 | |||
300HS-TU | 560 | fourteen/twelve | M | 1260~2772 | 350~770 | 13~63 | 300~600 | 965 |
R | 1152~2520 | 320~seven hundred | thirteen~forty four | three hundred~500 | 965 | |||
350HS-TU | 1200 | sixteen/fourteen | M | 1368~3060 | 380~850 | 11~63 | 250~550 | 1067 |
450HS-TU | 1200 | 20/eighteen | M | 2520~5400 | seven hundred~1500 | thirteen~fifty seven | two hundred~400 | 1370 |
25HHS-C | 30 | one.5/1 | M | 16.two~34.two | 4.5~9.5 | 25~92 | 1400~2200 | 330 |
50HHS-D | 60 | three/2 | M | sixty eight.4~136.8 | 19~38 | twenty five~87 | 850~1400 | 457 |
75HHS-E | one hundred twenty | four/three | M | 126~252 | 35~70 | 12~ninety seven | 600~1400 | 508 |
100HHS-E | one hundred twenty | six/4 | M | 324~720 | ninety~200 | 30~118 | 600~a thousand | 711 |
150HHS-S | 560 | eight/6 | M | 468-1008 | one hundred thirty~280 | 20~ninety four | 500~one thousand | 711 |
For the material of putting on components,
quotM quot = metallic, ultra chromium alloy quotR quot = anti-abrasive rubber
Contact
Welcome to make contact with us any time for information.
Your inquiry will get our prompt attention and reaction !